Hot Selling Latch Type Dental External Water Spray

Low Speed Handpiece 1: 1 Contra Angle

Contra Angle Handpiece Features

1. External water spray
2. Materials: aluminum; Bearing: Japan imported stainless steel
3. Chuck type: latch chuck

135°C Autoclavable, suitable for both steam and chemical autoclave
standard E-type Interface

Contra Angle Handpiece Technical Data

Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.

Operation Instruction:
It shall be sterilized before handpiece is used at the first time;sterilization temperature is 135ºC and last for 12 minutes.
After using,Please follow the instruction to sterilize the handpiece:
1 extract the bur from the handpiece,use the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2 lubricate the handpiece,pour two drops into air tube one time.
3 wrap it with sterilization package and mark.

Dental External Contra Angle Handpieces

Latch Type Contra Angle Handpieces

Stainless Steel Contra Angle Handpieces

Stainless Steel Dental External Contra Angle Handpieces Latch Type Images